t Fitting

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar), 75°F @ 250psi (24°C @ 17.25 bar).

180° center drain valve Three Way Valve 1/2" x 1/2" x 1/2". This is used to put in a low Point drain when open it drains from every direction. When closed it allows water to flow through the straight section only. This will work on PEX and Polybutylene Pipe.

Straight Swivel Fitting Shurflo™

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar), 75°F @ 250psi (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar), 75°F @ 250psi (24°C @ 17.25 bar).

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

A faucet connection to a Flair-It™ connection, these will fit most faucets with 1/2" MPT and 1/2" BPT comes with sealing washer. Will work with PEX and Polybutylene.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Barbed tee fitting for vinyl tubing 3-way.

Elbows with Flair-it™ connections on both ends used for connecting PEX and Polybutylene pipe.

Nuts

Plumb-PEX™ Plastic Male Adapter

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Plumb-PEX™ Plastic Male Adapter

Dual-size RV drain valve allows you to easily drain your RV fresh water tank.

Male Plug

Adapter with Female threads and Flair-It™ connection, will work on PEX and Polybutylene pipe

A faucet connection to a Flair-It™ connection, these will fit most faucets with 1/2" MPT and 1/2" BPT comes with sealing washer. Will work with PEX and Polybutylene.

Plumb-PEX™ Plastic Elbows - MPT

Available in 3/8" and 1/2"

Directional Washing Machine valve 1/2" x 3/4" Male Garden Hose, will also work on PEX and Polybutylene pipe.

Plumb-PEX™ Plastic Coupling

Male Plug

Male Elbow

Plumb-PEX™ Plastic Fittings t

Barb Elbow Swivel

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

Tilt Bin Starter Kit 1/2" CTS 35 Series Fittings.

Ecopoly pex swivel adapter .

Three way Bypass valve.

ECOPOLY swivel elbows.

Plumb-PEX™ Plastic Male Adapter

3/8" and 1/2" EcoPoly Fittings / PEXLock Clamp Kit. Kit includes 57 Retail Packaged Bags and Display Board ( Retail Packaged Bags Include: 1 EcoPoly fitting/valve and appropriate matching PEXLock Clamps.)

Ecopoly pex swivel adapter .

Quarter Turn Valve: 1/4" X 1/8" MPT. Tee: 1/2" X 1/2" Pex X 1/8" FPT.

Includes (2) Clamps.

Swivel Elbow 1/2" MPT X 1/2" FPT

Includes (1) Clamp.

PexLock Garden Hose Adapter. 1/2" X 3/4" Male Garden Hose. Includes (1) Clamp.

Includes (2) Clamps.

Dual Size RV Drain Valve allows you to easily drain your RV fresh water tank. Lower size 3/8" & 1/2" barb with flange.

Replacement Tear Drop handle for Flair-It valves.

Includes (1) Clamp.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

Flair-It™ connections, Measurements are run x run x branch, used with PEX and Polybutylene Pipe.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

Flair-It™ connections, Measurements are run x run x branch, used with PEX and Polybutylene Pipe.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.

t Fitting

Barb x MPT

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

Used for connecting Faucets (Female BSP) to a Flair-It™ connection, used for connecting PEX and Polybutylene.

Male adapter, will work on PEX and Polybutylene Pipe

Dual-size RV drain valve allows you to easily drain your RV fresh water tank.

Straight Swivel Fitting Shurflo™

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Replacement 3/4" hose plugs for city water fill with lanyards.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Male adapter, will work on PEX and Polybutylene Pipe

Nuts

Couplings with Flair-It™ connections on both ends, will work on PEX and Polybutylene Pipe.

Barb x MPT

Plumb-PEX™ Plastic Male Adapter

A 90-degree valve with Flair-It connections on both ends

Male/Female Adapter

Nuts

Tee with MPT branch connection, will work on PEX and Polybutylene Pipe

Plumb-PEX™ Plastic Coupling

Male/Female Adapter

A garden hose connection to a Flair-It™ connection. Will fit PEX & Polybutylene pipe.

Couplings with Flair-It™ connections on both ends, will work on PEX and Polybutylene Pipe.

This is a directional valve, the water must flow in the direction of the arrow.

Plumb-PEX™ Plastic Elbow Fitting

Male Elbow x Male Pipe Thread. For Connecting PEX and Polybutylene Pipe

Barb Elbow Swivel

Replacement Santoprene swivel seal 1/2" for Flair-it™"

Couplings with Flair-It™ connections on both ends, will work on PEX and Polybutylene Pipe.

Male Plug

Plumb-PEX™ Plastic Fittings t

This EcoPoly Service Kit includes 124 of the most popular 3/8”, 1/2” and 3/4” fittings. Also included are 100 clamps, 1 crimp tool, 1 plastic tubing cutter and a convenient carry case.

Plumb-PEX™ Plastic Fittings t

Barb x MPT

Elbows with Flair-it™ connections on both ends used for connecting PEX and Polybutylene pipe.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar), 75°F @ 250psi (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

This is a directional valve, the water must flow in the direction of the arrow.

ECOPOLY TEE 3/8”

Includes (2) Clamps.

Male adapter, will work on PEX and Polybutylene Pipe

ECOPOLY swivel valves.

ECOPOLY test plugs.

This fitting allows you to connect a Flair-It male pipe thread fitting to a flexible 1/2" water line. The fitting inserts into inside of the tubing as well as a nut that is on the outside of the tubing, tightening creates a durable bond. 1/2" FPT to 1/2" Flex Hose.

Plug Couplings for PEX or Polybutylene Pipe.

PexLock Swivel Elbow, 1/2" X 1/2" FPT.

Includes (1) Clamp.

PexLock Swivel Adapter. 1/2" X 3/4" Female Garden Hose. Includes (1) Clamp.

Tube End Fitting Nut. For Braided Pump Hose / Flex Tube. For braided hose tube use with suction side of water pump to prevent pulsating. Frequently used with fitting 696-47.

Barb Straight Stop Valve

Manifold Valve 1/2" FPT swivel x 1/2" MPT. This is a stacking manifold valve that can be stacked muliple times on top of each other in order to create a water control system. Will also work on PEX and Polybutylene pipe.

Water heater by-pass valve. Three Way valve 1/2" x 1/2" MPT x 1/2". This will work on PEX and Polybutylene pipe. You will use this to bypass your water heater so you can pump antifreeze into the plumbing system without getting it in your water heater.

Use to cap off a Flair-It™fitting. May also be used as a FPT cap for variour applications.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

Male/Female Adapter

Tee with a female pipe thread swivel in the middle will work on PEX and Polybutylene pipe.

Barb x MPT

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

Barbed tee fitting for vinyl tubing 3-way.

Manifold Valve 1/2" FPT swivel x 1/2" MPT. This is a stacking manifold valve that can be stacked muliple times on top of each other in order to create a water control system. Will also work on PEX and Polybutylene pipe.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Barb Elbow Swivel

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

3 styles available : 3/8" x 3/8", 1/2" x 1/2", 1/2" x 3/8", reducer connector.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Angle drain valve with Flair-It connections on both ends and tear drop handle.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Plumb-PEX™ Plastic Fittings t

Plumb-PEX™ Plastic Coupling

Use to cap off a Flair-It™fitting. May also be used as a FPT cap for variour applications.

Straight Swivel Fitting Shurflo™

PEX Swivel Straight Fitting

A 90-degree valve with Flair-It connections on both ends

1/2" x 1/8" Female Adapter. Commonly used for ice maker connections. Will work with PEX and Polybutylene pipe.

t Fitting

Male Plug

t Fitting

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Male Elbow x Male Pipe Thread. For Connecting PEX and Polybutylene Pipe

Replacement 3/4" male threaded hose plug with strap.

Used for connecting Faucets (Female BSP) to a Flair-It™ connection, used for connecting PEX and Polybutylene.

Male Elbow

Male Elbow

t Fitting

Plumb-PEX™ Plastic Fittings t

Kit consist of 91 Flair-It™ fitting in the most popular 1/2", 3/8" & 3/4" sizes for RV's & Marine. Kit comes with 25 tilt out bins, tags, wall panel and video.

t Fitting

Male Elbow

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

Replace your water heater drain plug quickly and easily.

Couplings with Flair-It™ connections on both ends, will work on PEX and Polybutylene Pipe.

Dual Size RV Drain Valve allows you to easily drain your RV fresh water tank. Lower size 3/8" & 1/2" barb with flange.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

ECOPOLY swivel elbows.

Plumb-PEX™ Plastic Coupling

ECOPOLY swivel valves.

Includes (1) Clamp.

Includes (1) Clamp.

Includes (3) Clamps.

Includes (2) Clamps.

Dual Size RV Drain Valve allows you to easily drain your RV fresh water tank. Lower size 3/8" & 1/2" barb with flange.

White Oval Handle for Flair- It valves. Non-Reducing.

Couplings with Flair-It™ connections on both ends, will work on PEX and Polybutylene Pipe.

12-volt Electric Valve Plastic 1/4" O.D.

Water heater by-pass valve. Three Way Valve 1/2" x 1/2" Male Pipe Thread x 1/2". This will work on PEX and Polybutylene Pipe. You will use this to bypass your water heater so you can pump antifreeze into the plumbing system without getting it in your water heater.

Used for connecting Faucets (Female BSP) to a Flair-It™ connection, used for connecting PEX and Polybutylene.

Male adapter, will work on PEX and Polybutylene Pipe

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar), 75°F @ 250psi (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

Each repair kit center contains: 110 of the most popular 3/8" fittings, 110 of the most popular 1/2" fittings, 1-Flair-It wrench. 1 - 4 drawer tilt out bin, 4-5 drawer tilt out bin, bin tags & header card.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

3 styles available : 3/8" x 3/8", 1/2" x 1/2", 1/2" x 3/8", reducer connector.

3 styles available : 3/8" x 3/8", 1/2" x 1/2", 1/2" x 3/8", reducer connector.

3 styles available : 3/8" x 3/8", 1/2" x 1/2", 1/2" x 3/8", reducer connector.

Barb Elbow Swivel

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

3 styles available : 3/8" x 3/8", 1/2" x 1/2", 1/2" x 3/8", reducer connector.

Male adapter, will work on PEX and Polybutylene Pipe

Barbed tee fitting for vinyl tubing 3-way.

Polybutylene plastic

Dual-size RV drain valve allows you to easily drain your RV fresh water tank.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Female Elbow 12" x 12" Female Pipe Thread. For Connecting PEX and Polybutylene Pipe.

Nuts

3 styles available : 3/8" x 3/8", 1/2" x 1/2", 1/2" x 3/8", reducer connector.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

For use with PEX and Polybutylene tubing on one side and fits male garden hose thread on the other.

A faucet connection to a Flair-It™ connection, these will fit most faucets with 1/2" MPT and 1/2" BPT comes with sealing washer. Will work with PEX and Polybutylene.

Plumb-PEX™ Plastic Elbow Fitting

t Fitting

Barb x MPT

Male Elbow x Male Pipe Thread. For Connecting PEX and Polybutylene Pipe

Barb x MPT

Male Elbow

Straight Swivel Fitting Shurflo™

3-Way By Pass Valve

Male Plug

Male Tee

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

ECOPOLY test plugs.

Available in 3/8" and 1/2"

Ecopoly pex swivel adapter .

ECOPOLY swivel elbows.

Three way Bypass valve.

1/2" X 7/8" BCT Ballcock Adapter

ECOPOLY swivel valves.

Plumb-PEX™ Plastic Elbows - MPT

Angle drain valve with Flair-It connections on both ends and tear drop handle.

Plug Couplings for PEX or Polybutylene Pipe.

Includes (2) Clamps.

Includes (1) Clamp.

Includes (1) Clamp.

Pexlock Angle Valve 1/2" X 3/8" Compression. Includes (1) Clamp.

Pexlock Ballcock Adapter 1/2" X 7/8" BCT. Includes (1) Clamp.

Includes (3) Clamps.

Includes (2) Clamps.

Includes (1) Clamp.

Replacement Tear Drop handle for Flair-It valves.

Replacement Tear Drop handle for Flair-It valves.

FPT Pex Nut.

Flair-It 06886 PEX Washing Machine Valve 1/2" MPT X 3/4" BIBB.

t Fitting

Water heater by-pass valve. Three Way Valve 1/2" x 1/2" Male Pipe Thread x 1/2". This will work on PEX and Polybutylene Pipe. You will use this to bypass your water heater so you can pump antifreeze into the plumbing system without getting it in your water heater.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

Barb Elbow Swivel

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

For use with extreme series pumps and accessories. Quick coupler kit (quick connect x quick connect) can be used to connect extreme series strainer/filter. Kit includes 2 fittings, 2 clips, 1 lube pkg.

24 series fittings are manufactured from acetal for general plumbing use. These fittings interconnect with Sea Tech's 35 series. CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

ECOPOLY swivel elbows.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar), 75°F @ 250psi (24°C @ 17.25 bar).

Transition from copper to Pex Tubing, copper to copper or copper to CPVC. Used to connect 1/2", 3/4", & 3/8" Copper Tube Size, PEX Copper, CPVC and Polybutylene to each other in a coupling connection. Sold as each. Available in pack's of 10.

Transition from copper to Pex Tubing, copper to copper or copper to CPVC. Used to connect 1/2", 3/4", & 3/8" Copper Tube Size, PEX Copper, CPVC and Polybutylene to each other in a coupling connection. Sold as each. Available in pack's of 10.

PEX Swivel Straight Fitting

A faucet connection to a Flair-It™ connection, these will fit most faucets with 1/2" MPT and 1/2" BPT comes with sealing washer. Will work with PEX and Polybutylene.

Use to cap off a Flair-It™fitting. May also be used as a FPT cap for variour applications.

Dual Size RV Drain Valve allows you to easily drain your RV fresh water tank. Lower size 3/8" & 1/2" barb with flange.

Flair-It™ connections, Measurements are run x run x branch, used with PEX and Polybutylene Pipe.

Used to connecto ice maker fittings, will also work on PEX and Polybutylene pipe.

Elbows with Flair-it™ connections on both ends used for connecting PEX and Polybutylene pipe.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

For use with PEX and Polybutylene tubing on one side and fits male garden hose thread on the other.

Adapter with Female threads and Flair-It™ connection, will work on PEX and Polybutylene pipe

Barbed tee fitting for vinyl tubing 3-way.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

Your Choice of 1/4", 3/8" & 1/2" MPT x 3/8" & 1/2" Barb.

A garden hose connection to a Flair-It™ connection. This will fit PEX and Polybutylene.

Male adapter, will work on PEX and Polybutylene Pipe

t Fitting

Plumb-PEX™ Plastic Elbow Fitting

For use with PEX and Polybutylene tubing on one side and fits male garden hose thread on the other.

Barb x MPT elbow.

t Fitting

1/2" MPT x 1/2" MPT Plastic Elbow

Male Plug

Available in 3/8" and 1/2"

Plumb-PEX™ Plastic Fittings t

The Flair-It™ Pro RV/Marine retail and tilt bin service kit contains an assortment of Flair-It™ Pro fittings all neatly organized in a tilt bin display case. Flair-it™ Pro fittings can be used with any PEX;A,B or C. This is an all plastic system so nothing can corrode. Rings are color coded for hot or cold water. Ideal for tight space installs. Fitting can be articulated into place. 25% larger fitting I.D. means better water flow. Kit also includes 2 Flair-it™ Pro 1/2" Install Tools, 2 Flair-it™ Pro Ring Install Cups and 2 PEX Tubing Cutters.

FPT Pex Nut.

Flair-It™ connections, Measurements are run x run x branch, used with PEX and Polybutylene Pipe.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

For use with extreme series pumps and accessories. Quick coupler kit (quick connect x quick connect) can be used to connect extreme series strainer/filter. Kit includes 2 fittings, 2 clips, 1 lube pkg.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code.180°F @ 100psi (82°C @ 6.8 bar). 75°F @ 250psi (24°C @ 17.25 bar)"

Water heater by-pass valve. Three Way Valve 1/2" x 1/2" Male Pipe Thread x 1/2". This will work on PEX and Polybutylene Pipe. You will use this to bypass your water heater so you can pump antifreeze into the plumbing system without getting it in your water heater.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

Dual-size RV drain valve allows you to easily drain your RV fresh water tank.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100psi (82°C @ 6.8 bar) 75°F @ 250psi (24°C @ 17.25 bar). CTS=Copper Tube Size.

35 Series products are manufactured in polysulfone and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, IGC 188-04c and recognized by the Uniform Plumbing Code. Rated: 180°F @ 100-PSI (82°C @ 6.8 bar) 75°F @ 250-PSI (24°C @ 17.25 bar).

Plumb-PEX™ Plastic Elbows - MPT

Plumb-PEX™ Plastic Elbow Fitting

Available in 3/8" and 1/2"

Plumb-PEX™ Plastic Elbows - MPT

Plumb-PEX™ Plastic Coupling

ECOPOLY test plugs.

Three Way Valve 1/2" X 1/2" FPT Swivel X 1/2". Handle Turns 90 Degrees. For use on RV Water Heater Bypass Setups.

Includes (2) Clamps.

Used with PEX and Polybutylene pipe.

Includes (2) Clamps.

Includes (3) Clamps.

Includes (2) Clamps.

Includes (2) Clamps.

1/2" fresh water fitting replacement seal.